hi there,I need help please.I need to add many url list to be allowed.
so I plan to use urfliter inside webfilter profie (existing webfilter
profile). rather than to add one by one, it takes time. is there a way
to copy - paste to CLI to add urlfilte...
hi,I've created secondary IP Address to certain Interface (Internal 2),
so we can define on Internal 2 has 2 ip:ip-1, and ip-2can I make:certain
host (computer) from ip-1 communicate to specific IP address on ip-2?If
different interface, I can make p...
hi there, I need to add override url so won't be blocked.what I
understand, there are two way:1. create custom web category2. add url on
web filter profile am I correct?there are hundreds url address that I
need to add. what is the best practice to a...
I've successful to create ipsec site to site FG-1 to FG-2, with
configuration:FG-1source local: intf3, ip 10.0.10.0/24destination local
address: 10.0.100.0/24FG-2source local address: intf1,
10.0.100.0/24destination local address: 10.0.10.0/24now I w...
Hi there, I have FG60D with no license. since this product already end
of life support.I want to use this firewall as basic firewall with:1.
restrict user from certain port, that only can access internet to exact
address.2. use antivirus with install...
hi, thanks for reference, but this only 1 to 1. and for @ede_pfau you
get what I need. actually I just created ipsec use wizard.is it possible
to edit and add local address in fg1, and add destination local address
in fg2?-> not working. here what I'...
hello thanks for sharing it.unfortunately still I can't do the same
way.when remove members, system not allowed to save the configuration,
need assign at least one member. I try to change switch mode to
interface mode, but get error. seems I need to ...
