Because Fortinet won't post bug lists... Known bug in 5.2, seems that it
handed out a DHCP address to a new device when the old device hadn't
timed out and had only been powered off for a day. When it came back on
the network the device said 'ip conf...
So I' ve got a mix of devices I' m playing with, our internal units are
a 80C and new FWF60D' s that I just programmed and installed. The 80C I
upgraded from 5.0.1 to 5.0.2 because I saw a huge difference in memory
utilization on a FWF40C from 5.0.1 ...
I followed the guide for a partial (1 WAN FGT to 2 WAN FGT) and set up
the ' set monitor-phase-1' to look at the primary phase1. That makes
sense and while I haven' t been willing to take down my corp office T1,
I' m pretty sure it works. However, th...
FWF40C running 5.0.1. Webfilter is configured on my outbound policy and
is working as it does block " blocked" web pages. If I do a search with
Google or Bing I' m able to turn safe search off thru the browser, IE 9
or Firefox 18. It will show regula...
Confused exactly how to configure this. Office FGT 60 is
192.168.254.251/0 with a WAN connection Resort FGT 60 is
192.168.254.250/0 with a WAN connection I have a wireless bridge
connecting the two firewalls on the LAN side making them on the same
su...
I tried with the help of tech support to accomplish this and couldn't
get it to work. I'm not doing load balancing, just redirect. DW_FTNT can
you explain further? The guide suggests setting to http not TCP. Further
I don't understand the rest of you...
Do you have a cable modem you're plugging into? They have their own MAC
cache and you have to power them down for at least a minute in order to
clear that so it'll talk to the Fortinet. IF you're using static IP that
is, and maybe dynamic, depending.
I had issues getting this modem to work until I forced it to LTE only
using the tool found here: http://www.evdoinfo.com/content/view/3492/64/
If 4G is weak though, I had to switch it to CDMA only. All of this has
to be done with it plugged into a Wi...
I may be experiencing something similar, are the SSID' s bridged or
tunneled? I see a huge difference in speed on my bridged SSID and the
tunneled one is 1/10th the speed with similar ping response issues.
