Hello Guys,I need your insights in a challenge i face with our FortiNAC
Deployment.Just a brief explanation of the topology and the case at
first. We have a NAC VM Cluster, in which we have enrolled our inventory
switches. we want dynamic vlan assign...
Hello Community,Please for your support.Just a brief explanation of the
topology and the case at first. We have a NAC VM Cluster, in which we
have enrolled our inventory switches. we want dynamic vlan assignment
for the users, based on an the Role at...
Hello Community,I will try to be as brief as possible.A couple of months
ago, we installed the collector agent to our two main DCs and
respectively the DC agent to a number of DCs across our SDWAN topology.
Since the begin the majority of the users a...
Hello,I am facing an error code to a random number of windows hosts
(approximately 30/400 windows 11 home & windows 11 pro devices).The
mentioned devices has recently appeared in the state " Running (OS
settings outdated" and the error code is "OS se...
I deployed a FortiNAC VM and configured policies to assign users to
VLANs based on their department. To achieve this, I used an Active
Directory attribute to assign a role to each user, which FortiNAC then
parses via AD synchronization. In the User ...
Hello,No, L2 polling does not help. Also, switch is cisco 9200 (5 sw
stack).i have opened a TAC ticket accordingly and i am in wait.But even
though the port appears as not connected, 802.1x and MAB works fine at
the moment.
Unfortunately, the port does not be shown correctly, even though the
vlan change and the authentication works properly, the port shows as not
connected (FortiNAC) and switch wise shows correct. Note that the port
shows as not connected only when we e...
Hello and sorry for the late repsone. Issue partially resolved by
changing the "aaa server radius dynamic-author port" to the default one.
Regarding the view issue i did not find any solution yet. Even though
the authentication is completed successfu...
