To All, Does anyone have any ideas for how to allow Clients with Static
IP's to show as On-Net when on the internal network? In our specific
case, our servers are all set with a static IP address. FortiClient
running on the Servers (2012R2) only show...
To All, Is anyone experiencing issues where a Windows Server is
gradually slowing down over the course of a few days with FortiClient
running? We have been experiencing this issue for several months, and we
constantly unregister, shutdown, restart, a...
To All, Thank you in advance for your help on this problem. I am rather
new at configuring FortiClient using XML, so this may be a very simple
question. We have a small environment, with 10-15 clients. Under the
configuration that most clients are re...
Gianluca, Thank you very much for your reply above! We will try to
update to 5.2.7 in the coming days and will report back our findings
asap! Thanks again, and I hope you have a great week! -foshejh
Gianluca, Just checking to see if you have had any luck resolving this
issue. We have recently started having this same issue with a new
Windows 10 computer. We are running a FG60D with V5.2.3 and FortiClient
with v5.4.0.0780. Getting stuck at 98% ev...
cncah, Thank you very much for your help on this! That was the exact
article that I found that was able to help me solve our problem. The dip
switch on the Bluetooth Module needed to be switched in order for the
hidden menu to show up. After I correc...
I am having this same issue as well, but for a i560 phone. Can you
provide any advice or feedback from your experience? Thank you for your
help on this! Thanks, foshejh
Kolawale, Thank you very much for your reply! It is great to know that
FortiNet is working through the Beta testing of FortiClient 5.4.
Recently, we upgraded FortiOS and FortiClient from 5.2.3 to 5.2.4. Is
was not a great experience for us, as we enc...
