Hello, I have a problem with disabling usernames that register on the
Captive Portal create on my FortiAuthenticator.After the registration
but before approval by an Administrator, if the user tries to
authenticate with the credentials they registere...
Hello, everyone,I would like some advice on how I could make a bridge of
a LAN subnet over a WAN connection.I would like to use a GRE tunnel that
succeeds through an IPSEC connection between the two FGTs the ability to
reach hosts from the other site...
Hello, everyone,has anyone installed 7.2.4 ? in our infrastructure we
have two Fortigate one 3300E and another 3000D ( in test ) . Each one
has manifested problems, especially with Virtual Servers with SSL
termination and in Voip audio streams like C...
Hello Guys, I have problem when enable WorkFlow Management in Global
Setting. As the articol
https://docs.fortinet.com/document/fortigate/7.2.3/administration-guide/656084/firewall-policy
, the option "Policy change summary " and "Policies expire by ...
Hello Guys,I deployed two SSID in WPA2 Enterprise architecture with
authentication on Windows Radius ( NPS ) as the link below and
everything works (
https://docs.fortinet.com/document/fortiap/6.4.0/fortiwifi-and-fortiap-cookbook/414919/wifi-with-wss...
I tried to disable User Lockout Policy and the issue was not happened
again.Here is the Captive Portal locked screen when the user try to
connect before the approval.I hoper to find a bug that will be recovered
with new release.
yes i have lockout policy but they have attempt 10 times I don't think
this is the problem because the lockeout timeout then after 60 seconds
ends but in my case it remains disabled.
Hi guys,I found an article that did just my
purpose.https://docs.fortinet.com/document/fortigate/7.4.3/administration-guide/184150/vlan-inside-vxlanEven
without the Ipsec tunnel.Was very useful and easy to implement because
it is also applicable to o...