Hi all, we have two locations with the following IP settingsLocation 1:
192.168.1.0Location 2: 192.168.2.0 and on a lot of clients secondary IPs
of the 192.168.3.0 network The Fortigate on Location 2 has on the LAN
facing Interface 192.168.2.x and a ...
Hi all, i'm about to learn it the hard way, what there have been major
changes in 5.2.I'm following this guide:
https://www.youtube.com/watch?v=lqYbNqZSPRAI understand that there is
only one policy needed now, allowing remote clients to connect to th...
Hi all, i' m new to the Fortigate Firmware naming convention, and
currently i am totally lost. Logged in to the Fortigate-Supportaccount,
in the firmware section it states newest release: 5.0.7 Build 3608
Latest 5.0 Patch Release Released 9 April 201...
Hi orani, with administrativ access enabled for ping on that secondary
IP on location 2 firewall, there is no ping reply. 7.592865
VPN-to-Location 2 out 180.22.x.x -> 192.168.3.250: icmp: echo request
8.608995 VPN-to-Location 2 out 180.22.x.x -> 192....
ok, solution:(this really is a tough one)it all came down to this bug
here:http://blog.boll.ch/?p=1557 yet i did the upgrade path 100%:
Firmware upgrade: v5.0,build4225 (GA) FGT30D-5.00-build179
-->FGT_30D-v500-build0228-FORTINET.out v5.0,build0228 (...
Hi again, ok, split tunnel is working and i can access protected lan
through the tunnel (RDP), i just get no traffic back to the client (no
ping answer from a server in corporate network coming back).The static
route points to the sslvpn clients' adr...
