Hello, I have a problem ! I can not use my VPN client (Shrew) if I have
already a site to site VPN configured on the same device. My research
has shown that this is due to the WAN IP is the same for both VPN. Is
there a solution to my problem ? thank...
Hello, I have two internet link WAN1 and WAN2, and two network LAN1 and
LAN2, I would like if possible LAN1 uses WAN1 and LAN2 uses WAN2 for
internet use. I tried several scenarios with routing, but it does not
work. I use MR3P5. Have you an idea? Th...
hello, I have two internet connections with one F80c and I would like to
know how to use an connection for Internet and the other dedicated to
connnexion IPSEC VPN ? outgoing and incoming vpn connection. Excuse me
for my english thank you
My config config router static edit 1 set device " internal1" (ISP to
Internet) set gateway X.X.X.X set priority 5 next edit 2 set device "
internal6" (ISP to VPN) set gateway Y.Y.Y.Y set priority 10 next edit 3
set device " VPN_1" set dst A.A.A.A 25...
hello, I also use the dual wan, but without the PBR, just static routes.
(VPN iterface mode)
http://support.fortinet.com/forum/tm.asp?m=84932&p=2&tmode=1&smode=1 Bye