I have a fortigate and use SSL VPN. The setting is that a VPN connection
can only be established from certain countries “Limit access to specific
hosts”.Now someone is going on a round trip by boat and will want to
establish a connection from several...
Hi all, in a hand full of sites we have got problems with our dyndns
connected ipsec sites.These tunnels have to be manually reseted from
time to time. Within the logs I can see the tunnel is getting down and
our HQ Fortigate tries to connect to the ...
Hi all, completely new into FortiEMS or in generell into Fortinet.Right
now we are running on FortiEMS Cloud 7.2.5.1061 and would like to
upgrade to the newest version. Found this
article:https://community.fortinet.com/t5/FortiClient/Technical-Tip-Ho...
Do I have to write it in there / like this? config System ddnsedit 1set
monitor interface "TunnelName" - or the WAN Interface in general?set
use-public-ip enable set update-interval 60end
Wondering if this may be the solution?Got this hint by support-team
Refresh DDNS IP addressesWhen using a public IP that is not assigned to
the FortiGate, the FortiGate cannot trigger an update when the IP
address changes. The FortiGate can be config...
Hi Christian,set the dns Cache ttl to 60VPN Setting was on DDNS hostname
since set up. No need for this."Under Advanced Settings, ensure there is
an option to automatically update the gateway when the IP changes" <--
did not find this.DPD already "on...
