Fortinet Community

Adam_Shortt_FTNT · 06-16-2022

Description This article describes how Fortinet Support may advise monitoring the system at the console under specific circumstances. The process to do so is outlined below. Scope FortiGate, all firmware. Solution A few prerequisites are needed: 1) D...

Adam_Shortt_FTNT · 10-02-2013

DescriptionIn an environment where there is a significant volume of traffic and UTM enabled, the network interfaces handling the traffic may experience Rx_Over_Errors: diag hardware device nic port3...Rx_Packets 301963122Rx_Packets_Dropped 0Tx_Packet...

Adam_Shortt_FTNT · 05-06-2013

Description The purpose of this article is to aid in troubleshooting WAN connectivity between the FortiGate firewall and a service provider. It is assumed that the FortiGate unit has limited or no Internet connectivity even though the appropriate ISP...

Adam_Shortt_FTNT · 11-15-2012

Description The FortiWeb VM accesses log files from a virtual machine disk (VMDK) file. The following steps outline how to add a new VMDK to replace the original VMDK using VMware Player 5. This procedure is helpful when upgrading to a larger VMDK, o...

Adam_Shortt_FTNT · 06-08-2012

Purpose The FortiWeb does not perform any address translations for outbound sessions, it simply passes through the source device IP address. The upstream gateway has to do the NAT and also needs a route to get back to the source device network.This p...

Fortinet Community

User Statistics

User Activity

Technical Tip: How to connect to the FortiGate console port

Technical Note: Rx_Over_Errors on a network interface

Troubleshooting Tip: Internet connectivity issue resolution on a FortiGate unit

Technical Tip: Managing Virtual Disks in FortiWeb VM

Technical Note : FortiWeb Source Address Translation for Outbound Sessions

Fortinet Training Institute