In our FortiGate environment, both BGP and static routes are configured
for the same destination. However, the system currently prefers the
static route, which remains active at all times. As a result, during an
IPsec tunnel failure, traffic does not...
FortiGate FSSO has been successfully configured and enrolled. However,
when applying it to a firewall policy and checking user connectivity,
the connection appears to be successful.The issue arises when a user
logs into their laptop using fingerprint...
I have created ADVPN in one hub and two branches with two isp. my issue
is one tunnel traffic all are working but when down active tunnel and
all traffic going via this tunel but my issue is branch hub connectivity
ok but branch to branch not ping. P...
I have referred the below article but this showing only active passive I
need active active dual hub architecture implementation guide.
https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-sd-branch-architecture-for-mssps/242513/sd-wan-configura...
This is my topology and so Tunnel 3 for used sttaic route tunnel 3
separate tunnel in for NAS server access i need when tunnel 3 goes down
need to automatic disable this sttaic routes
in sp2 showing this please help SP2 # id=20085 trace_id=1240
func=print_pkt_detail line=5846 msg="vd-root:0 received a
packet(proto=1, 192.168.20.2:1->192.168.40.1:2048) tun_id=2.2.2.1 from
SP2TU2. type=8, code=0, id=1, seq=1383."id=20085 trace_id=12...