Hello,I have two FortiGate 60F 7.4.7 devices configured for redundancy
in case of failure. The setup includes two physical WAN interfaces:
ISP-1 (wan1) and ISP-2 (wan2). There is also a virtual LACP-1 interface
that combines internal1 and internal2. ...
It turned out that the issue was with the client. Windows 11 24H2
26100.3624. In my case, the link below helped. I appreciate your
Help!Windows 11 VPN Connection - The L2TP connection attempt failed
because the security layer
I was troubleshooting the issue and decided to try a different client. I
used an Android phone with FortiClient VPN, and everything worked
correctly—traffic flowed in both directions, and all necessary VLANs
were reachable via ping. The Phase 1 and P...
Thank you for your advice, I made changes and add policies toward those
VLAN interface, unfortunately the situation has not changed.
FortiGate-60F (IPSec_VPN_Delta) # show config vpn ipsec phase1-interface
edit "IPSec_VPN_Delta" set type dynamic set ...
