I have a internal (default) network 10.25.0.0/24 on port 1 and 2. I
created a new network 10.20.10.0/24 on port 3. Clients connected to the
internal network can ping the Fortigate gateway 10.25.0.1. Clients
connected to the network on Port 3 cannot p...
I have a Fortigate 60F with 2 networks. 10.25.0.0/24 is the default
internal network and I have 10.25.10.0/24 configured on Port 3. There is
not policy routing between these networks yet. I accidently set the
Trusted IP restrictions on the Admin acco...
Aha! you are correct. The root cause is a configuration on the Aruba
1930 switch. The VLAN connected to Port 3 was configured to block all
traffic except to the Internet (the default configuration apparently). I
removed the restriction and everything...
So the client can't ping the firewall and the firewall can't ping the
client, but the client can use the firewall (physical port3 at
10.25.10.1) to get out to the internet.
This is the result of the route print and tracert on the 10.25.10.114
client: C:\Users\jheimann>route
print===========================================================================Interface
List3...b0 41 6f 10 8d f8 ......Realtek PCIe GbE Family Co...
