I have my VPN's running the way I want, but can't seem to find the right
method to enable SNMP access over the VPN. Actually see the source CACTI
server connect over the VPN to the "root" device on the LAN side of the
remote fortigate, but it's denie...
Site A is the hub, and contains 5 subnets.
192.168.0.0/24192.168.1.0/24192.168.2.0/24100.0.0.0/24172.16.120.0/24
Site A has destination routes that contain the individual phase 1 for
the spokes.Site A has a zone interface created that contains all ph...
I have 3 domain controllers that I have installed the FSSO agent on. I
have configured the fortinet 300D to query the three domain controllers.
For desktop users I am pretty happy with the authentication. For laptop
users that bounce between wifi and...
Can' t seem to formulate the following policy as I get stumped by an
un-editable implicit Deny. (FortiOS 5.0.9) I want a policy that does
this. If you are a MAC/IPad, apply this AV/webfiltering policy. If you
are anything else, continue down the poli...
Have a look at this post as well. More detailed than the technet one.
This is what I used to fine tune it. Basically when a client polls DHCP
for an address, the DHCP server will handle the dynamic updates to DNS.
Somehow this will register a Logon e...
Pavel_Livonec_FTNT wrote:Hi,In your case it might be possible that the
clients do not update their DNS record after moving from wired to
wireless network. If collector agent receives the workstation name in
logon event, then it needs to translate it ...
yaba wrote: the relevant firewall rules, please try the following
command? set ntlm enable Can you expand on why NTLM enable would affect
my wireless clients?
