hi, having issue with dialup tunnel and mode-cfg enable with dynamic
routing. When trying to ping from dc 10.11.8.129/25 to branch
10.11.8.1/25 side to branch I get a error stating no matching ip
selector drop, I noticed looking at the tunnel the src...
Hi all I have a specific request to setup sdwan at a branch site, the
branch site will run version 6.2.1 and the ipsec tunnels will
terminating to a perimeter multi tenant firewall running version 5.2.7.
I am planning to setup dialup tunnels as the r...
configured config mode, using bgp for dynamic routing but hit another
issue a getting selector issue when pinging from perimiter to branch and
vice versa dc # 2019-08-28 09:46:05 id=20085 trace_id=296
func=resolve_ip_tuple_fast line=4310 msg="vd-root...
The reason for that is the configuration is based on on pilot I did some
time ago running version 6.2 on both sides, the version 5.2.7 does not
allow me to add the subnet mask in the ip. I would assume I can add the
remote ip and make it 10.115.6.2 b...
