Hi All, I am suffering by the trunk port crash when two trunk ports
plugged between Forigate and Fortiswitch Environment: I am using 1x
Fortigate 80F, 1x Fortiswitch 124F-POE and 6x FortiAP 431F. The cable
connections are below:a. 6x FortiAPs are con...
Hi All, Recently the vulnerability of topic
"https://www.fortiguard.com/psirt/FG-IR-19-037" is popular, and I have
to fix the problem. I am currently using FWF-90 and already upgraded to
Fortios 6.0.12. However, for fixing the issue above, I have to ...
Hi All, Recently I check my firewall and found that there is a interface
called "unknown-0", under FortiView->Interfaces.May I know what it is?
Seems the security profiles like application control can not work for
this interface. Thanks Kenny
Hi All, I have using FortiOS 5.4.13, and I am suffering by application
control. I tried to created new application sensor using below
instruction.https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-security-profiles-54/Application_Control...
Thanks. I will try. and:1. May I know the DHCP in VLAN conflicts with
the DHCP setup in SSID?2. I have some wired printer in the
192.168.1.1/24 network, is it still printable after change the settings?
Thanks again
Hi ebilcari,Thank you for your help.I am not familiar on AP's management
VLAN is needed to be configured for port 1-6, may I know how to do this?
Thanks again
One more thing, I have created the SSID with the DHCP for the FortiAP,
that connected with the Fortiswitch (Port 1 - 6), is it necessary to add
the subnet/vlan to the fortilink interface? attached the settings below
for your reference. Thanks again
Hi elilcari,Thank you for your reply.Actually I missed to mentioned that
I tried to use two fortilink ports, but the devices connected with
switch cannot ping the gateway in 80F. I have followed the instruction
here, and followed the topology you pro...
