Hi, I installed FAZ1000c,I could see 2 devices (FGT80c),I created a
layout,which is applied in the schedule,for 2 FGT80c I created 2
separate schedule with same layout.First I created schedule as a
Ondemand.Then when I run each device schedule...For ...
Hi, I am installing FMG400c,I have added few firewalls,I could see the
devices which I have added to FMG400c,when go through teh Device
Manager,I could see the devices,in which it shows the status as UP and
configuration as Unmodified but installatio...
Hi, I have a small doubt on FXO ports in FGV80C. I have Site A and Site
B. Now can I connect 4 normal analog phones to each site FGV80 C and
configured SIP in both Firewall?Will the normal analog phones will work
between site A and Site B as a Hotlin...
Hi, My branch FGT is 50B and I have one FGT80C spare at H.o.Now since
the branch FGT50B is down (Hardware issue),Now I have the backup of the
branch FGT50B,now I want restore the backup of FGT50B to FGT80C.Is there
any tool to convert the FGT50B conf...
Hi I sold FGT 11c to my customer very long back,which has the following
firmware version v4.0.3,build0106,090616, I want to know which release i
s this,I think it is 4.0.0 not belong to MR1 or MR2 or MR3.Please
confirm. And now I want to upgrade to t...
Hi, I have two standalone firewalls in diffrent location......I am
receiving the logs from teh firewall to Analyzer....I have created two
separate Layouts with diffrent charts....applied each layout for each
schedule.....I am getting report for 1 fir...
Hi All, I really thank and appreciate all the needy help extended to
resolve my issue.As per the guidance I could resolve the issue. Thank
you so much, S.Venkataraman
