Hi, Anyone have a dataset for firewall authenticated users? I've looked
through all the dataset in the latest version, didn't find any that
refer to this. Thanks. Best regards.
Hello, Several days ago I've upgraded a FG110C from 5.2.10 to 5.2.11. Up
to 5.2.10 I was able to use an address group containing a FQDN for SSL
VPN split tunnel. After upgrade to 5.2.11, the split tunnel routing
address reverts back to none. When I s...
Hi all, A client received a /22 subnet of external IP addresses from the
main ISP and they would like to offer their own customers internet
access via /30 subnets. (out of the same /22 subnet) I' m trying to get
an idea how to configure this on the F...
Hello, A FortiGate 50B running FortiOS 3.00, MR4 Patch 5 has a PPPoE
connection on the internal interface which is used for backup purposes
via a IPSec tunnel to the central location. There is a static route in
place for the network on the central lo...
Hello, Does Fortigate support static route tracking or any way of
implementing it? I would like to create a default route and a backup
route and make Fortigate monitor a target using ICMP. If there is no
reply, FG should use the backup route instead....
Q: what is this 2nd connected route on ppp0? Q:also are you enable to
ping either from the cli ? This is the ISPs gateway behind all VPN over
ADSL connections. I can ping 192.168.3.252. From other locations on
older firmware, the first hop in tracing...
Here it is: Through the GUI, static route 1 has a distance of 10. I' ve
tried setting both distance and priority for it to 5, but it didn' t
help. config router static edit 1 set device " internal" set dst
192.168.252.0 255.255.255.0 set gateway 192....
