Hi everyone, I need to use an IPSEC VPN connection for automatic dial-in
using (machine) certificates. This used to work in EMS 1.0.5 using an
XML configuration that disables xauth.However the xml parser in EMS 1.2
seems to always add1 and
I tried to...
Hi there is anybody actually using the central VPN console mode in
fortimanager? I am trying to convert VPN Configurations and have all
sorts of trouble, e.g. creating a phase 2 to an external (non managed)
Hub that needs a src-subnet and dst-subnet....
If I remember correctly the supported second factor for SSL VPN is
certificate based only. So trust your personal CA and deliver
certificates to the users.
Hello, aggregate or redundant interfaces are only supported on devices
starting from 100(D).You could use STP and just connect the two cables
to two hardware switch ports though.
By the way in my lab the follwing is not workinga) use a VIP with a
defined WAN Interface -> the SD WAN Router should then consider the VIP
and automatically also consider the linked Interface. Would be nice but
doesn't happen. IP Translation will st...
Yes, this is what I really don't like about SD-WAN. The rules seem to be
just a retarded Version of the policy Routing engine. However, they even
kick in if they shouldn't even be considered. So - Workaround - create
policy rules with your internal N...
I would say you should consider also the 100D- OK, older (D) generation-
D is a little cheaper than E- rock solid device running at many many
customer sites- OS 5.2 support if pure stability is a key factor Of
course you can go for the latest generat...
