Steps for SIP Trunk Setup:Configure the SIP Trunk on FortiVoice:Go to
System > Network > SIP Trunks in the FortiVoice interface.Click on
Create New and select SIP Trunk.Enter the IP address or FQDN of the CUCM
server.Set the Port (usually 5060 for no...
FortiOS 7.4.4 introduced some changes related to VPN, including stricter
handling of NAT-T (NAT Traversal) and new IPsec settings. These might be
causing issues with your tunnel, especially since one of your FortiGates
is behind NAT. Make sure that N...
You mentioned that even after disabling the tunnel for ISP1 and the
static route, traffic is still passing through ISP1. Double-check the
static routes on both firewalls. There could be a persistent route
pointing to ISP1 that is overriding the routi...
The error log suggests there’s a problem with the configuration data
being corrupted, and also with the VPN system extension. It is a
NSCocoaErrorDomain and there are hundres of them which I have learned
while reading that:
https://meaning.bot/what+i...
The installation failure might be due to compatibility issues with the
Snapdragon processor or missing prerequisites. Try the following: Run as
Administrator: Right-click on the FortiClient installer and choose Run
as administrator to ensure it has t...
