Hi,I'm trying to schedule a full-config backup, from a 40F to a ftp
server visible on vpn s2s. using this command:execute backup full-config
ftp '/xxx/FGT_%%date%%.txt' 10.3.64.113 user pwd I receive this
output:"Send config file to ftp server via vd...
Hi @dingjerry_FTNT thanks I resolved. - assigned IP to vpn tunnels-
added a static route to destinations tunnel ip- modified policy on both
firewalls to accept incoming connection from tunnel ip
show system interface "VPN-SF-HQ"config system interfaceedit
"VPN-SF-HQ"set vdom "root"set ip 0.0.0.0 255.255.255.255set type
tunnelset snmp-index 5set interface "wan"nextend get router info
routing-table all | grep VPN-SF-HQS 10.3.0.0/16 [10/0] is d...
exactly like my setup. policy and routes are ok.Hosts under lan
interface can reach destination with no problem.If I use fortigate cli
and I try to ping the same destination under vpn tunnel, fortigate uses
its own wan interfaces (also a wan port act...
@dingjerry_FTNT problem not solved, It worked to one tunnel only.I also
tried to set ip to tunnel interface on both side. How can I show you the
configuration in a safe mode?
Thanks @dingjerry_FTNT I have always set phase 2 of the tunnel with the
address 0.0.0.0/0.0.0.0 and in fact the problem is exactly this.set the
correct subnets and now the firewall knows how to reach the destination
