Hi, We have a Fortigate which act as router/firewall to protect/split
our different networks. It is also used as the Internet Gateway.Our VPN
clients are connected through Cisco AnyConnect Platform, getting RFC1918
IP. These IP are NATed (other RFC19...
Hi, We want to use the "script feature" located in "login >
configuration > scripts" to upload and run objects/rules instructions.
When all goes well, script is "success", but when one command fails,
part of hundred of lines, GUI returns only "script...
Hi, We have a simple architecture :- a wan int for incoming request to
our servers with static nat- several int for internal servers and users
ressources- a single default route for outgoing and reverse traffic-
several static routes for different re...
Trying to be more explicit : Client connect to VPN, get 10.0.0.1 =
mandatoryClient is NATed on VPN plateform with 192.168.1.1 to reach
Fortigate Networks = mandatoryClient should go to Internet = must be
reNATed with public address on Fortigate Clien...
Thanks a lot.We wander about route policies : using route policy seems
to be not applied if there is not default route, whereas it is read
before static table (as explained in doc).Is there anyway to use route
policy without adding default route on s...
