Hi everyone, I have a FortiAP 221E which is showing small numbers of
"antenna defect detected (AP wifi radio 1 antenna defect detected at 2)"
warnings. They seem to occur in small groups (3 to 5 at a time) perhaps
a couple of times a day. Generally t...
Hi all, I hope this is the right forum for this question. I have a 60E
on a VDSL WAN service. My question:- for overall performance is it
better (however that's defined!) to let the CPE router manage the PPPOE
session or let the Fortigate do it? My u...
Hello, Perhaps prematurely (!), I have upgrade my Fortianalzyer AWS ON
Demand image to 6.2. The 6.2 upgrade introduces a "Security Fabric" ADOM
option from what I can see. My aim was to add a existing single
Fortigate 60E (already at 6.2 and previous...
Hello, I've recently upgrade FortiAnalyzer on AWS to 6.0.3 Build 255.
I'm using the On-Demand "free" licence with a limit of 2 ADOMS. The
security fabric (small as it is) consists of a FortiClientEMS (running
6.0.3 Build 134), a Fortigate 60E (runnin...
Hi Everyone, I'm running FortiOS 6.0.2 on a Fortigate 60E and having a
few issues with IPv4 DOS Policies. I've exposed an NTP server to the
Internet and added into the NTP Pool. However, as you might expect, I'm
seeing a few issues from users/ system...
Hi ShieldNS, I know that iPhones and Mac’s have settings for “Private
Wi-Fi Address” enabled by default. This essentially uses a “random” MAC
address which changes per network I think. Is it possible to turn this
setting off on one device and see if ...
Hi taglerock, What you are doing seems correct. Of course you should
disable everything on the external interface really- http will redirect
to https by default so http needs to be disabled too, ssh should also be
disabled unless you have a good use ...
Hi mikeymouse, The ports used by FortiOS can be found in the
documentation site here:-
https://docs.fortinet.com/document/fortigate/7.0.0/fortios-ports/637075/incoming-ports
It lists port 8013 as being used by FortiClient for "Compliance and
Security...
Hi efelledi, The key question is how many users and devices will access
this interface over the course of 1 week? At the moment you have set the
“Lease Time” to 604800 seconds (7 days). That means that every device
attaching to the interface will hav...
hi islanderfj, Not sure if you have seen the maintainer process- you
need to do it via the console cable I think. The process is described
here:- https://kb.fortinet.com/kb/viewContent.do?externalId=FD34757 If
the maintainer account has been disabled...
