Hello, I have a pair of 100F firewall configure in HA with
Active/Standby and HA dedicated MGMT Revervation is also configured with
ha-direct enable. I am tried putting the AD details in the fieldsa and
under regular provided the AD Credentials Admin...
I am using Fortigate 100G in HA and running Firmware 7.2.9. The issues I
am facing is the interface is able to reach the NTP Server. NTP Server :
192.168.1.10FGT MGMT : 192.168.1.4 I have added a MGMT interface under
dedicated management interface, w...
Hello Everyone I am using 2 x Fortigate Firewall 100F firewall in HA
Active-Standby with latest firmware. Both the devices are sync with each
other. I have configured both the firewall with Dedicate Management
Interface and also enabled SNMP service ...
I lost the access to both the firewall once I executed below command.
Will try tomorrow by connecting the console cable. config system
dedicated-mgmt set status disable
Hello Just FYI that system is under production, I believe that working
on the Management inteface does not cause traffic disruption. But want
to know if I execute this command will the System be accessilble through
SSH? Also If I remove the disable d...
