Technical Tip: Upgrading FortiManager/FortiAnalyze...

FortiKoala · 10-14-2022

Description This article describes how to reset the local certificate if it has expired and preventing playbooks from running e.g. Alerts -> Execute -> [PLAYBOOK]. Scope FortiSOAR 6.2 Playbooks. Solution In the FortiSOAR command line, run the followi...

FortiKoala · 10-28-2020

Description This article describes the workaround for an issue where the users connected to an SSID operating in Tunnel Mode are unable to access Intranet/Internet.Scope FortiGate v7.0.15.Solution Users connected to the SSID in tunnel mode receive a ...

FortiKoala · 09-30-2020

Description This article has been raised due to the highlighted problem and complexity of managing SSL certificates referenced in these articles:Fortinet VPN with Default Settings Leave 200,000 Businesses Open to Hackers.https://thehackernews.com/202...

FortiKoala · 03-04-2020

DescriptionIf error occurs when connection progress is at 98%, a popup window will show the status code of the tunnel thread (T), monitor thread (M) and RAS thread (R). The status code could either indicate the stage the thread is currently at, or an...

FortiKoala · 07-17-2019

DescriptionThis document describes how to upgrade FortiSwitch firmware. ScopeFortiSwitch SolutionUpdating standalone FortiSwitch firmware from GUI.Upgrade the firmware from the dashboard or from the system configuration page.To upgrade the firmware f...

FortiKoala · 02-01-2018

It looks like you need to create an intervdom link from 3rd party to wan1 root port http://kb.fortinet.com/kb/viewAttachment.do?attachID=inter_vdom_new.pdf&documentID=FD36065

FortiKoala · 02-01-2018

The answer lies in the first part of the authentication process. The Fortigate is not providing authentication, rather it is simply using the Database provided by your domain controller. That means in order to access your internal network a client mu...

FortiKoala · 02-01-2018

From the release notes it looks like the The 100C and 110C can't go beyond 5.2.x.

FortiKoala · 02-01-2018

The 4.0 release notes state its supported: "FortiAuthenticatorTM 4.0 extends the local user self-service password reset capability to support Active Directory user password management." Maybe they can use the FSSO self service portal http://cookbook....

FortiKoala · 02-01-2018

FortiCloud reports should resolve IPs to host names for websites (external) by default. But local IPs will not be resolved to computer names though. There is no option on FortiCloud to view the PC/Server/Device name.This is by design. In the default ...

User Statistics

User Activity

Technical Tip: FortiSOAR 6.2 Playbook not executing for alerts (reset certificates)

Technical Tip: Users connected to Tunnel Mode SSID are Unable to Access Intranet/Internet when CAPWAP Offload is enabled

Technical Tip: SSL VPN Certificate Man in the Middle (MitM) attack mitigation for SMEs

Technical Tip: Unable to establish the VPN connection. The VPN server may be unreachable (-30)

Technical Note: Upgrading FortiSwitch Firmware

Re: Help with getting VDOM-NAT and VDOM-Transparent to share same WAN port?

Re: Doubt about FSSO timers

Re: FortiOS - FortiAP - Version query

Re: FortiAuthenticator User[USERNAME] is a remote user. Password reset is not supported.

Re: Workstation Hostnames in Logs

Technical Tip: Upgrading FortiManager/FortiAnalyze...

Technical Tip: How to avoid certificate error mess...

Technical Note: No Persistent Agent credential win...

Technical Tip: Host connection not detected on sec...

Technical Tip: Upgrading FortiAP Firmware

Re: Doubt about FSSO timers

Fortinet Training Institute

KCS