Dear all, I have diagram as below: --------- tunnel 01 --------------Hub
(lo0) (Lo0) Spoke ---------- tunnel 02 ------------- I am using BGP on
loopback to set up routing via 2 Tunnels. (FortiOS 7.4.4)And I try to
set up SD-WAN Rule to steering BGP t...
Dear All, I have strange trouble, I have 2 Fortigate running HA (A-P),
and have 2 internet connected (internet leased line). Line 01 is working
well, but line 2 , its flap down around 30 seconds, interval ~ 30
minutes. During this happened, I can not...
Hi @stroia Thank for your information, I mean BGP is working fine, but I
want to steering BGP traffic use SDWAN rules, example: I have 2 tunnels,
01 and 02. And I want to steering BGP traffic via Tunnel02. And I did as
I mentioned above, and then che...
Hi @funkylicious this is link-monitor config:
-----------------------------config system link-monitoredit
"Check-ISP1"set srcintf "x3"set server "8.8.8.8"set gateway-ip <-- this is correct i am sureset source-ip set interval 8000set probe-timeout 30...
Hi @dingjerry_FTNT, I checked HA log , and saw it is normal. System
event log has alarm of port disconnected, Because , link monitor is
dead.as I shown above. I call ISP , and they comfirmed no problem on
their side, I guess that this bug of OS 7.4.4...
