Hello, anyone experience any odd issues where it doesn't appear that the
ssl-vpn daemon is listening on WAN2? When I enable debugging I never see
a connection attempt regardless of what port I set the daemon to listen
on. I've tried ports that I know...
Hello, I' m running firmware version 5.1.3 (happened with 5.1.1 as well)
and I' ve been getting lots of complaints from end users that email is
going into their quarantine despite the sending addresses being in the
personal whitelist. Upon investigat...
Hello, It appears that the FortiClient 5.0.4 for Mac OSX does not
properly pull down and apply the DNS search suffix settings configured
on the Fortigate 100D firewall. Our windows clients are pulling the dns
search settings fine but not the macs. I ...
It turns out that despite the GUI settings being correct, the
authentication portion of the SSL VPN config in the CLI showed that it
was still tied to WAN1. Changing it to WAN2 fixed the problem. Relevant
config section below. set default-portal "ful...
ORIGINAL: Bromont Patrick, BTW what' s your system load/throughput when
the issue happens? It happens constantly and consistently throughout the
day to hundreds of users. Any user who receives email from someone who
is on the DNSBL, or fails deep hea...
ORIGINAL: Bromont Patrick, I would say there is an issue there... push
for escalation of your ticket I' m on it. Was hoping someone else was
having a similar issue and might be able to share the solution but it
isn' t looking that way. Thanks,
ORIGINAL: emnoc So you have someone sending you a message from comcast?
And your okay with this? or was this a test only? Now to your problem,
in the ASprofile & the DNSBL setting action, I guess you have a policy
set to quarantine if it matches the ...
ORIGINAL: emnoc Can you explain what type of quarantine with regards to
AS? Please add a copy of the AS log entry for the mail message your
referencing. http://i.imgur.com/YyRsMr6.png
