Hi,I deployed forti in aws.the forti deployed in az 1a.I have 2 subnets,
1a and 1b.I attached to forti 2 eni1 eni for the wan traffic.1 eni in 1a
az.in the subnets route table, I route 0.0.0.0/0 traffic to eni that is
attached to forti.I attached the...
Hi @issa00 ,I solved the issue.For subnets on another AZ that route to
Internal ENI, you need to set the gateway IP for the first IP in the ENI
subnet. The first IP of the subnet is to the internal AWS route. For
example Test-1b subnet is on 1b AZ so...
Hi @issa00 ,The first three sections are correctly defined.I didn`t
understand the 4 section, how can I verify it can handle traffic from
1b?if you mean if I disable the source/dest check, I disable it.Thanks
