I got it to work.At first i had static route to WAN and OSPF route to
VPN.Only Static route to WAN was in the routing table.So static route to
WAN and VPN did the trick.Had two different routes to same network over
WAN and VPN and Policy Routeing cou...
I tryed to implement Routing Policy.So i changed routing a little.Over
WAN i'm using static routes. 192.168.20.3 and 2 can ping
192.168.10.2.Over VPN i advertise OSPF and same ip subnets.When i try to
use Policy routing, pics included i can get a mat...
Soon I will give you those outputs.But what i want to achieve is
192.168.20.3 and 192.168.10.2 can ping each other using OSPF Area 0 over
WAN interfaces and 192.168.20.2 can ping 192.168.10.2 over VPN
interfaces using OSPF Area 1.Right now with stati...
The hosts 192.168.20.3/32 and 192.168.10.2/32 can reach each other
through OSPF if OSPF is configured properly (you mentioned that they are
both in the same area 0).<---They are and when 192.168.10.2/32 static
route are disabled, they can ping each o...
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites