Hello, I would like to block HTTPS traffic from clients. Within
application control I was able to select "HTTP.BROWSER_IE" and apply it.
So, wants to connect to an external site with HTTP a replacement message
is displayed. Unfortuntately, there is n...
Hello, I need to create a FortiClient installer without "Zero Trust
Telemetry" which is enabled by default and cannot be disabled according
to
https://docs.fortinet.com/document/forticlient/6.4.2/ems-administration-guide/942839/adding-a-forticlient-d...
Hello, older datasheets of FG-101F series talk about 1.6 Gbit/s of IPS
throughput. Newer versions mention 2.6 Gbit/s. "Hey, let´s simply add 1
Gbit/s."... So, has anyone of you tested a FG-101F in production? What
about that SOC4 - how many SOC4 chip...
Hello Fortinet users, have you read
https://fortiguard.com/psirt/FG-IR-18-100 and
https://seclists.org/bugtraq/2019/Nov/38 already? The author of the
vulnerability suggests that all information of traffic that is analyzed
by "FortiGuard AntiVirus", "...
Hello, https://www.degen.solutions/ uses TLS 1.3. When I try to access
this homepage the browser shows a white page, only. Disabling IPv6 one
my client, the homepage loads without any problem. I am running FortiOS
6.0.5. I already entered a new outgo...
FG-500E cluster with 6.2.2. WAD eating 12GB of RAM => conserve mode. Is
there any workaround available? Can someone help me creating a auto
script? Something like When memory is > 70% => reboot (As it only boots
one member of the cluster it should wo...
As this issue exists (https://fortiguard.com/psirt/FG-IR-18-100) and the
only way to fix it is upgrading to FortiOS 6.2.x can you recommend using
6.2 right now?
Update: The FortiGate doesn´t change the flow label at all. But a RST
packet is just sent to the client as if the webfilter profile was
triggered. This happens only if IPv6 flow label is enabled on the
client. Talking about IPv6 flow label in general...
