Hi all I'm working on a WCCP Optimization with Riverbed. The WCCP it
self works and the init paket from the client to the server are
forwarded to the Riverbed (WAN Optimization) and send to the server. All
good at this point.But, the return paket are...
Hi all One of our customer would like to implement a 3rd Party WAN
Optimization (not FortiWAN). An Topology is in the attachment. Asymetric
Routing is enabled and Reverse path check is disabled. My issue is how
to configure the Fortigate to allow and...
Hello As I know you have only the possiblity to block words with the
content blocker. But you have to add each word or phrase (wildcards) by
your own. See this KB Article:
https://kb.fortinet.com/k....do?externalID=FD41605 With my knowledge
Fortinet ...
Hi WCCP Client ist on a dedicated Interface connected. The WCCP
configuration are follow:config system wccp edit "101" set router-id
10.230.123.111 set server-list 10.230.123.10 255.255.255.255 set
forward-method any set return-method any next end An...
Ok, the following should work: config router staticedit 1 set gateway
wan2_IP set device "wan2" config router policyedit 1 set input-device
"corp1_vlan" set src "10.64.0.0/255.255.255.0" set dstaddr "all" set
gateway "wan1_IP" set output-device "wan1...
