Hello everyone,I'm looking for guidance on configuring a network
authentication scenario using FortiGate and FortiSwitch devices, along
with a FreeRADIUS server. Here's my hardware setup:FortiGate 100F
running firmware v7.2.8FortiSwitch 148F running ...
Thanks for your suggestion!I successfully configured RADIUS
authentication for the Wi-Fi network, and clients are now authenticating
correctly.Could you please advise on how to configure RADIUS
authentication for wired clients as well?
I was able to configure it using a certificate for WiFi authentication.
Would it be possible to use the same authentication for the switch
ports? If so, how can I configure it on the FortiGate?
Thank you for the clarification. I initially thought it might be causing
a conflict because when I set MS-CHAPv2 on both the FortiGate and
FreeRadius, the authentication works, and I can connect to the WiFi
using a username and password. However, I a...
Thank you for sharing the procedure.I took a look at the guide, but it
appears to reference RADIUS configuration on a Windows server machine.
Currently I am using FreeRadius on a Linux machine.
Thank you for your reply.I've successfully configured FreeRadius for
EAP-TLS authentication and have installed the appropriate certificate on
my laptop. However, when attempting to configure the RADIUS server on my
FortiGate, I noticed that EAP-TLS i...
