jroy777
New Contributor III
‎09-23-2024
Last activity: Sep 24, 2024 5:08:34 AM
0 Profile 0% Complete
Most Liked Posts Recent Solutions
No Content Available

User Activity

So I have some questions about BGP community-listsIs a route-map required to use with a BGP community-list? I have a single Data Center with two 10G AWS Direct Connect Circuits and the subnets on both ends are exactly the same, just a redundant path....
We have existing Fortiswitch that is connected to a Cisco ASR. The Cisco has the layer 3 interfaces and IP's assigned for WAN and vlan subnets. We want to now install a second FortiSwitch, use the layer3 capabilities and use vrrp to make the link red...
We have a working Cisco router doing bgp to AWS Direct Connect. What is the correct way to create the layer 3 interfaces (Direct-Connect, inside and dmz/uat) and the required Vlan 2900 with correct dot1Q encapsulation. Do I create on a sub interface ...
I want to assign an IP on the internal (btw, what does that mean?) that is in the same subnet as the management IP.Mgt 192.168.50.40 internal 192.168.50.41It keeps telling me there is overlap. So I found this, and applied but it does not work. Even t...