Wondering if anyone has had any experience with the topic above. I have
a current environment with fortilink managed switching in MCLAG with a
LACP connection to a single Ruckus switch. I'm running into some
interesting STP issues where my ICLs are b...
Hello everyone, I am in the process of building a short report for
firewall policy usage and I am having a bit of a time trying to retrieve
the firewall policy usage from any "diag" commands. Unfortunately, I
don't have API access to the devices that...
Unfortunately, the "set rpvst-port enabled" command did not do the
trick. FortiSwitch links to the Ruckus still go into a
Learn>Forward>Discard state rapidly. The only thing that brings the link
up is disabling STP on the FortiSwitch Trunk or removin...
That was the route that I was looking to go down but I'm not familiar
with Ruckus and kinda looked at it sideways when I saw that it was
actually running per VLAN RSTP as opposed to MST or straight RSTP.
There may be some discrepancy with the code versions on some of the
commands, I am running 7.4.3 for testing. Those are all great commands
but to point back to my original request, there is no native way to
retrieve a hit count for all policies witho...
Also correct, but that requires you to have a predefined list of IDs and
I believe there is a constraint on that command to only allow for ~14
policy ID args. I was trying to avoid having to get a list of IDs and
then iterate through that list runnin...
