DescriptionThis document describes what TCP port 1000 is used for and
how to disable it.Some network scanners gives the information that TCP
port 1000 is open.The FortiGate will listen on TCP 1000 for all
configured interfaces, if authentication keep...
DescriptionThis document describes how to override default route
settings: administrative distance and priority, for default route
received from DHCP.A DHCP server can send a gateway address with Option
3 (Router) on a DHCP Offer message:If the Forti...
DescriptionThis article demonstrates the deployment of OCVPN (Overlay
Controller Virtual Private Network).OCVPN is meant to be really fast and
easy to configure because it will automatically create:- Local and
remote address groups- Routes- Policies-...
DescriptionThis document describes how to check if traffic shaping is
used on active sessions and also demonstrate which traffic shaper is
taking precedence between policy based shaper or traffic shaping
policy.SolutionIn this example, traffic shapin...
DescriptionThis article describes how to configure FortiGate as NTP
server.SolutionFortiGate can be used as authoritative NTP source for
other clients. In our setup, 'port1' is the interface connected to
internet and 'port2' the LAN interface (where ...
Hi, From where is this echo request packet being sent :7.084324 wan out
10.99.99.39 -> 18.104.22.168: icmp: echo request If this is from the FGT
itself using ping command ?If so, this is local traffic and I'm afraid
you cannot use SNAT on that.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.