RE: FORTISANDBOX AI-MODE ACTIVATION IMPACT

jwhite_FTNT · 05-09-2024

Per the dual-stack referenced, you would enable Dual-Stack on the FortiGate VPN Gateway setup as well as in the EMS FortiClient setup. If NAT is enabled on the dual-stack Firewall Policy, it enables both IPv4 NAT and IPv6 NAT66 (both enabled by defau...

jwhite_FTNT · 03-01-2022

Hi Luis,The quick answer: Reverse Proxy is the best security options for deploying FortiWeb WAF. The choice between a transparent deployment vs. reverse proxy is usually determined based on latency sensitive. In cases where any increases in latency a...

jwhite_FTNT · 11-13-2019

No, there is no loss of functionality and the performance is not negatively impacted when you enable AI-Mode. The tool enhances the detection engine capabilities, improving the overall detection rates. Our internal testing has shown an improvement in...

jwhite_FTNT · 11-12-2019

You are missing the "-t" flag that specifies the type of filter you want to enable.Example of enabling the DLL prefilter: sandboxing-prefilter -e -tdllNote: There is no white space between the -t flag and the followed option

jwhite_FTNT · 09-12-2019

What you are describing is a feature set used more commonly by ADC technologies like F5 vs. traditional WAF, but is something to take into consideration for future development efforts. NOTE: FortiADC, which competes directly with F5, supports this op...

User Statistics

User Activity

Re: Dual stack in SSLVPN tunnel mode (Forticlient) and NAT when using IPv6

RE: Is it recommended to use True Transparent Proxy mode in FortiWeb?