Dear All, I have a forticlient ipsec users. I need 1 user to be able to
use RDP throught the same vpn tunnel and others not. Vpn Tunnel is
working great. When i create a rule and using the Source User(s) the
user i need to have rdp allow, the traffic...
Hello,Tested on 6.4.2 i have finally succeeded with Fortigurad to use
the below but is still not working as expected .It blocks at least some
but not all as with previous Versions ( 6.2 or 6.0.10).F-SBID( --name
"SMTP.Login.Brute.Force.Custom"; --pro...
I have the same problem with 6.4.2 for SMTP . F-SBID( --attack_id 8641;
--name "SMTP.Brute.Force_NEW" ; --pattern "Authentication failed";
--service SMTP; --no_case; --rate 0,5,limit ; --track dst_ip; --flow
reversed;) not working . in 6.2 the below ...
Dear All,thank for your replies.I understand and is correct to use first
http authentication and then to open rdp.All the http/ traffic does not
go through the tunnel.So have i have to try is to open an browser and to
have direct ip to the tunnel int...
Dear Ede, i have never used in the past identity policy. The vpn has
split enabled so the traffic for web goes through local gateway of pc
connection and not through the tunnel. How the user will authentigate to
the fortigate ? I thought that as he a...
Dear Ede, i did this but the results are the same. the log from the Cli
: id=20085 trace_id=1011 func=print_pkt_detail line=4368 msg=" vd-root
received a packet(proto=6, x.x.x.x:51913->x.x.x.x:3389) from
VPN_PeerA_0. flag Still cannot understand !!! ...
