We recently upgraded from a standalone FortiGate 1500D running FortiOS
7.2.8 to a pair of Fortigate 601Fs running the save version of FortiOS
as an Active-Passive HA pair. Our deployment consists of 10 total VDOMs
and 8 10G physical interfaces. There...
Hello All, We are working on a FortiGate upgrade for a customer and they
have VDOMs configured on their current deployment. They are moving from
a 1500D to 601F both running FortiOS 7.2.8. We have FortiConverter and
have used the application to map a...
After calling in to TAC and discussing this issue with them, it was
determined that for virtual clustering to function properly no physical
interface should be active in both virtual clusters at the same time.
This documentation is available for the ...
Hi there, I appreciate your response but you entirely missed the focus
of this post. Yes, we are upgrading from an older standalone model to an
HA pair. The goal is not to join the new FortiGates to the old one. My
question is about virtual clusterin...
Upon reloading the config with the vdom=1 set after running it through
FortiConverter and adding a "config global" at the top of the script,
and an additional "end" at the end of it, I was able to successfully
mirror the current running config! Forti...
I believe I may have found the solution:
#config-version=FG6H1F-7.2.8-FW-build1639-240313:opmode=0:vdom=0:user=admin#conf_file_ver=325820514117705#buildno=1639#global_vdom=1
#config-version=FG1K5D-7.2.8-FW-build1639-240313:opmode=0:vdom=1:user=admin#...
