Hi all I have a windows laptop connected to internet with wifi and
connected to a device with Lan cable. The laptop is connected to my
fortigate in office with forticlient from home. Can I from my office
where fortigate is located connect to devices ...
Hi all,I have this situation: 1) Fortigate 60F 2) Gl-inet with
openfortivpn -> connected to fortigate with openfortivpn using terminal
command openfortivpn -c ./config to the GLinet router Openwrt system
(lan dhcp server 192.168.8.xxx) are connected ...
Hi all, I would like ping hostname device when I connect to fortigate
with ssl-vpn (forticlient) and not only ip of device.It is possible? fo
example I have a NAS and remotely (forticlient) I can ping its IP
address but not its host name. If instead ...
hi all, I wrong to create a vlan and it appears in the interface when i
try to create a policy but it isn't visible in interface page. How can I
delete it?many many thanks in advance
Hi all,Actually I'm testing my new fortigate 60f and for test I have
this configurations:modem -> oldFirewall (wan ip 10.0.0.10; lan
20.0.0.1) -> fortigate (wan ip 20.0.0.10; lan 192.168.10.1)I can can
connect to forticlient but actually I cannot pin...
Hi @hbac, many thanks for your help.Just one more question. You mean I
need impose policy in fortigate or in openwrt whereopenfortivpn run with
Linux terminal?Maybe do you have some tutorials or suggestion for
setting policy?
Just one more question please I explain one problem with my situation
FortiGate lan 30.0.0.1-254 and it work as dhcp between 30.0.0.50 and 150
I have a Device with host name MYNAS and static ip 30.0.0.200 gateway
30.0.0.1 subnet 255.255.255.0 dns1 30...
I have this situation:modem -> router -> fortigate (not lan dhcp server
until now) -> switch1 some machine with static ip (30.0.0.10...ecc/24)
-> switch1 how can reach machines with static ip and gateway 30.0.0.1? I
need ad a lan interface in the for...
many many many thanksit works...just one more question if I have some
machines with static ip 30.0.0.10 30.0.0.20 etc but I don't have any lan
or wan on that subnet, how can i reach them in forticlient? I try adding
the policy as myou suggest to me b...
