I'm working on learning the capabilities of the FortiNet SD-WAN
features. Using this guide
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configure-IPsec-VPN-with-SD-WAN/ta-p/209840
I've been able to connect SiteA and SiteB, each with mult...
I'm playing in Eve-NG, trying to get SD-WAN setup. I've got everything
configured but something doesn't seem to be correct.I've got (within
eve-ng) an 8.8.8.8 that I'm pinging as my performance SLA. I've got some
NETem devices between my FortiGate FF...
SiteB and SiteC are separate networks, 192.168.2.0/24 and
192.168.3.0/24. So on SiteA they should be 2 different SDWAN zones. Is
that because of routing?
So this is interesting. While I tried the config system global set
snat-route-change enableand it didn't work, I thought "what if somehow,
the command just wasn't taking effect". So I enabled the command, then
rebooted the FortiGate. Now things work ...
Yes, it's increasing and as I stated, if I let the session clear (either
naturally or force the session to clear) the traffic flows out the
correct interface.
It took me a bit to find preserve session route, assuming that's on the
WAN interface and not somewhere within the SD-WAN configuration, it is
disabled.
