i want to use a 100F in HA mode but the 2 devices will at opposite ends
of a long building so i was going to run the HA over fibre but the HA
ports are RJ45 (ethernet) can i use any port for HA or will i have to
run Cat5/6 for the HA?
I have a customer who tells me he is going to use Fortigate 90D'sthere
is a SPT fibre ring with 2 x Fortigate 90's connectedthe 90D's need to
act as one i.e. VRRP they also need to NAT to the inside also with VRRP
on the inside interfacesand they nee...
HiI have been asked to design a critical infrastructure network that is
going to be using FortiGate90D firewalls The system will have a large
fibre ring passing through 20+ sitesthis will be a large layer 2 network
with VLAN's and CoS/QoSthe actual v...
it would be static NATforgot to mention that the ring has a load of
VLAN's on itin the past when i have done this i would usually use 2
switches on the ring and then connect each switch to both firewalls
You are leaving our website
You are leaving our site and we cannot be held responsible for the content of external websites