1. go to policy, ENABE 2. Under log& report> log config>log setting>
check the mmeory box under minum log leve change to " info" 3. You
should get some log. If this still not working. This may caused by
previous image. you need to Format the boot dev...
Hi, I ran into the same issue before. If you do the folloing step, it
should work. 1. check the DNS. Go to System>Network>DNS click to use
FortiGuard Serves. The primary DNS sererver should be 208.91.112.53 2.
Check your IP/sunbet and default gatway....
The priority field overrides route sequence for resolving two routes
with the same administrative distance. The route with the lowest value
in the priority field is considered the best route. For CLI command,
under the config route static edit 1 set ...
Since you are using Fortigate 60B. I am assume you are using version 4.
1. Create a firewall address that you want to get access from 2. Create
a firewall address you wan to get access to. For example in cli config
firewall address edit " IP access F...
I don' t think 50A will support it. FWF 80CM, and FWF 60C and FGT 60c
will be support for usb-Verizon and usb-spring. However, USB-Verizon
works better. I recommand using the usb-verizon.