Device is FG-60f running the latest 7.4 firmware. I have 2 vlan switches
set up. One routs traffic to wan1 and the other to wan2. I set up
policies and routing policies for them and both are working fine. Vlan
switch 1 services subnet 192.168.2.0/24 ...
This is what I'm trying to set up on an Fortigate 60F with firmware
version 7.41: Wan1 - multiple static IPssubnet 192.168.2.0/24 on vlan
switch internal on internal 1 portAdministrative Distance: 10 via static
routevarious inbound and outbound polic...
Ok, so I set up a new FG-60F with UTM this weekend. I set up antispam on
my incoming port 25 to insert a header into the email. This is working
just fine. But upon further inspection, I noticed that another header
was being inserted into some spam em...
Fortinet_Gateway (internal) # showconfig system interfaceedit
"internal"set vdom "root"set ip 192.168.2.1 255.255.255.0set allowaccess
ping https ssh fgfm fabricset type hard-switchset stp enableset role
lanset snmp-index 15nextend The only configure...
@ndumaj Correct"internal" = vlan switch 1 services
192.168.2.0/24"Internal wan2" = vlan switch 2 services 192.168.3.0/24 I
set nat disable initially, when it didn't work as expected, I set nat
enable to try. I just happend to capture the config while...
