I want to turn off Lockdown ISL on Fortigate firewall, but it
automatically turns back on. How can I turn it off?I found this in the
Fortigate library, but I didn't have much
success.https://docs.fortinet.com/document/fortiswitch/7.2.6/fortilink-guid...
I am trying to add a device on Fortinac, the device is being added but
the cli settings are not valid.Fortinac:9.4.4The error I got was as
follows,Spoiler (Highlight to read)Unable to negotiate key exchange for
server host key algorithms (client:
ecd...
FortiGate, Firewall cannot pull users while doing SSL-VPN. It is taken
in the group from all other user/groups. The user portal is actually the
current users of the portal, Users/group is mapped to the port.
I want to configure FortiLink over a point-to-point layer-2 network for
connection to FortiGate Firewall and Cisco BB (Backbone). I need to
connect FortiSwitch via Cisco BB. I'request support on how I can perform
this configuration.The environment ha...
I don't have problems with newly added devices, I have problems with
devices on Nac. When I look at the event logs of the device on Nac, I
see the error message. I can access the devices I receive error messages
from via cli.
The settings I made on Fortigate Firewall and Switch are as follows. The
switch receives IP through the firewall. Satus remains down.Fortigate
FirewallFirewall config system interface edit "fortilink" set vdom
"root" set fortilink enable set ip 10.25...