I just need to confirm that the FWF-40F has a single radio and that if I
want to have multiple SSIDs using different bands 2.4GZ or 5.0GHZ, you
have to do one or the other BUT NOT both? To do both, the next product
available is the FWF-80F-2R or is t...
Hi -New to FortiGate and a firewall newbie as well. Current layout
Verizon FIOS G3100 router3 SSIDs1 with WPA2 @ 2.4 GHZ (legacy)1 with
WPA2 @ 5 GHZ (legacy)1 with WPA3 # 5 GHZWAN IP 98.113.x.x (obviously not
providing my WAN IP to the public - no of...
Alec – Thanks for the info. Is that the only model you’re aware of that
allow simultaneous use of 2.4GHZ and 5.0GHZ bands at the same time? I’m
very surprised that most of the models home office / small business
models make customers choose between b...
I am assuming that you have already created a static route to the
outside for all unknown traffic.NO. Would that be destination 0.0.0.0 /
0 going to my WAN IP as the gateway on my WAN interface?and also created
a security policy for your wireless sub...
It''s a WiFi40F. I did not rebuild the hard-switch interface. I reset
the FW to factory defaults once to start new. The reference I see to a
LAN interface is when I go into the policy and choose my incoming
interface. I can choose INTERNAL or LAN.Int...
Toshi - Making progress. Never heard of "overload". I figured pinging by
name would prove DNS works as well as connectivity. I did repeat
successfully with pinging by IP so ICMP works. I created policies for
all 3 SSIDs and was successfully able to c...
