Does Fortigate 6.4 support RIP routing inside VRF?
Just wanted to make sure that this feature is not supported. Thank you.
Just wanted to make sure that this feature is not supported. Thank you.
i need a report for Top 10 user by bandwith and their destination. i created a drilldown top user ,but top web sites should be in drildown columns.how can i do that ? examplesitewebsiteCategoryBandwith User a(source ip) 15GBtotal web site 1 8GB web s...
HiI have to implement Let's Encrypt certificates on my fortiweb 400E appliance.For test purposes I managed to achieve it on my demo/test FortiWeb 400D, everything is fine.On my production 400E I constantly get error logs : Let's Encrypt failed to iss...
Under Log View... Log Browse... I can see how to download past logs in ~55MB chunks, which tend to cover 5-10 minute chunks of time. I can see how to select one at a time. Or even a screenful at a time. When I choose Download, I then must confirm, in...
Is it possible to reach the FortiSwitch joined at FortiGate directly from the subnet assigned?For example to send SNMP or ICMP request(monitoring) or configure some feature from web gui. Thanks guysac
We at the present are utilizing a FortiGate 100F (in NAT mode running on a single IP address on the WAN) that is connected to a Cisco Nexus 9000 series switch via a VLAN trunk with the default gateways for all the VLANs being located on the 100F. I h...
Is there a way to see "Restrict to Specific OS Versions" results in the FortiGate or FortiAnalyzer log? We are using the VPN only client. Is there another way to see VPN user OS version without full FortiClient?
Our company using ssl-vpn with two Fortigate (v6.4.0 build1579 (GA)) VMs running on Azure. A total of about 1,500 users are usually connected them from home and have been in operation for about a year and a half. But 2 weeks ago, around 12:23 p.m. mo...