Fortinet Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.

Forum Posts

VPN has trouble connecting with the remote gateway

Our ForitClient installations (v6.0.10) are all controlled by EMS (v6.0.8). Multiple end-users successfully use FortiClient IPSec VPN for remote work from homes. So IPsec VPN tunnel both on FortiGate end and on FortiClient EMS side proved to be confi...

VicAndr by New Contributor III
  • 1181 Views
  • 1 Reply
  • 0 Likes

ssl VPN auth-timeout

I have a fortigate 6.0.9 that we use for SSL VPNs, I have set vpn ssl settings with the default auth-timeout 28800 secondsin the logs I see that there are a lot of sessions with duration much longer than 28800 seconds and I can see SSL VPN tunnel dow...

alexnenci by New Contributor
  • 874 Views
  • 0 Replies
  • 0 Likes

Pass ipv6 OSPF on FortiGate transparent mode

HI, I want to pass ipv6 ospf on FG-1200D transparent mode, This FG between two cisco 3750, I tried many methods , multicast-skip-policy enable、set multicast-policy action accept、firewall policy set all to all,Virtual Wire Pair.....,But this seems to ...

LeoWu by New Contributor
  • 693 Views
  • 0 Replies
  • 0 Likes

Fortinet SSL VPN Virtual Ethernet Adapter - Disabling

Ohio .o/ We have a fleet of ~100 users whom access our services over an SSL VPN. All runs smoothly 98% of the time ( ... ). Occasionally, we have users unable to connect. Always at the most opportune times (i.e. when they're on the other side of the ...

FGT 60F issue with IPSec behind double NAT

Hello All, Sorry if this was already answered. I'm having a weird issue with a Site to Site VPN where the Fortigate is sitting behind a double NAT (Carrier Grade NAT from the Provider + NAT from an LTE Modem). The setup line diagram looks something l...

thehaw by New Contributor
  • 3466 Views
  • 8 Replies
  • 0 Likes

Reading sensor list of FortiAnalyzer CLI

Hi Team, I would like to check on how to read the power supply via CLI on FortiAnalyzer if its functioning well? I don't see any KB what this values stands for. PS1 Status | 0x1 | discrete | 0x0100| na | na | na | na | na | na PS2 Status | 0x1 | disc...