Hey =) Unfortunately, I have problem with my VPN configuration. Error Forticlient stopt by 80% I have already implemented all the suggested solutions including Internet Explorer Settings or configuration enabled TLSv1.1 etc. it says in the log "diag ...
Hey =) Unfortunately, I have maybe a basic problem in my VPN configuration. Error Forticlient stop 80% I have already implemented all the suggested solutions including Internet Explorer Settings or configuration enabled TLSv1.1 etc. it says in the lo...
We have a Web Filter Security Profile where the FortiGuard category based filter is enabled and set to Block for the "File Sharing and Storage" category. We want to restrict which "File Sharing" sites our users can access. So we created Static URL Fi...
Hi, I have a IPSec VPN setup with our FGT 60 device. It works fine for one country and doesn't connect from other. I haven't applied any geo restrictions on the device and wondering what could be the reason for such behavior. Attached is VPN setup co...
I need to perform routing on a stick with Cisco switches, so I need to create vlans on my Fortigate interfaces. https://kb.fortinet.com/kb/viewContent.do?externalId=FD30883 Reviewed the above link/article - but what is interesting - an IP is already ...
I am coming from the Cisco world, and in that world Cisco Policy Base Routing (PBR) is processed outside of the route table, so PBR will get processed before static routes or any route currently in the table. Is this is the same behavior on Fortigate...
Dear All, I'll try to keep this as short as possible, my hardware is 1500D running 6.0. With this design I'm trying to: * Share two ISP connections across multiple VDOMs (named VD_APPA, VD_APPB, VD_APPY, VD_APPZ) * All VDOMs are layer 3 (NAT mode)* N...
Hey All, I have a FortiWiFi 60D that we recently moved to a different location with a different phone service. I changed the 'switch mode' to Interface, created a new interface going to Physical Port 7 on the FortiWiFi to be under the 192.168.20.0 su...
