Wireless Controller
Dedicated Wi-Fi control and management for high density and mobility
vpatil
Staff
Staff
Article Id 368923
Description This article describes the commands to verify the status of a specific process and the command to kill the process on the FortiWLC.
Scope FortiWLC v8.6.
Solution
  1. Get into the 'dli' mode using the 'dli' command.
  2. Execute the below command to verify the status of a specific process: for example, 'hostapd' process:

 

status.png

 

  1. Finally, kill the process with the process name:

     

 

For example, in the below screenshot, the 'hostapd' process is killed and after that, the PID changed from 6049 to 16711.

 

kill .png