Meru Technical Note - Xprintserver issue - Unable to Print Wirelessly

[nsamuel]

Description

Xprintserver issue - Unable to Print Wirelessly.

Scope

KB ARTICLE TYPE: Configuration

RELATED PRODUCTS: MC1000, MC1500, MC3000, MC3200, MC4100, MC4200, MC5000

RELATED SOFTWARE VERSIONS: 3.6.1-67, 4.0-150, 4.0-165

KEYWORDS: print, wirelessly

Solution

Check the ESS profiles --

Multicast is enable on the ESS profile ( No Tunnel )

 ESS profile is test profile -- with confirmation, deleted that.

Test AirPrint -- it should work fine now.

Configuring Multicasting

DESCRIPTION: Multicasting is an advanced feature and can cause subtle changes in your network. Multicast is allowed only when the ESS has a one-to-one mapping with the default VLAN for this ESS. No other ESS can use the same VLAN. By default, multicasting is disabled.

CONFIGURATION STEPS:

From GUI:

Configuration >> Wireless >> ESS >> Select ESS Profile>> Allow Multicast Flag: ON/OFF>> OK.

CLI Steps:

controller(config)#essid name

controller(config-essid)# multicast-enable

controller(config-essid)# exit