DescriptionConnecting AP320i at remote site
Scope
KB ARTICLE TYPE:
Troubleshooting
RELATED PRODUCTS:
Access Points, Controllers.
RELATED SOFTWARE
VERSIONS: 3.X, 4.X,
5.X
KEYWORDS: AP320i, AP300,
AP311, AP208, AP1010SolutionQuery about connecting AP320i in a
remote location.
We can connect the AP in a remote
location by configuring it in L3 mode. Over the WAN the AP will be able
to find the controller if the ports 5000, 9292, 9393 are not
blocked.
Stations connected to that AP will have
access to the network resources available at that site where the
controller is located.
We can also have a ESS profile
configured for Bridged Profile, Only the management frames will be
going to the controller and the data packets will go out through the WAN
of the remote site.
